Problem 01
Moving Around the Seat
Raised walls and vehicle straps create a dedicated passenger area.
Car seat when driving · backpack when walking
One Carrier from the Car to Your Destination
A convertible pet car seat and dual-shoulder backpack designed for small dogs and cats.
- ✓ 360° enclosed passenger-seat area
- ✓ Headrest and seat-anchor attachment
- ✓ Folds flat for compact storage
A dedicated travel space for the drive, then a wearable carrier when
you leave the vehicle.
01
2-in-1 Design
Converts from car seat to backpack
02
Enclosed Protection
Raised sides surround the pet
03
Breathable Mesh
Side panels support airflow and visibility
04
Reinforced Base
Foam and board support the floor
Designed around multi-stage pet travel
Less Roaming in the Car. Less Gear to Carry.
Problem 02
Closed, Stuffy Carriers
Large mesh panels allow airflow and help pets see outside.
Problem 03
Separate Car Seat and Carrier
The same unit converts into a backpack after the drive.
Enclosed support around the pet
A Defined Passenger Space for Small Pets
Raised fabric and mesh walls surround the sitting area while keeping the top open for easy access.
01
Raised Side Walls
Help separate the pet from the surrounding seat.
02
Open Top Access
Makes placing and removing the pet easier.
03
Built-In Safety Tether
Connects to a properly fitted chest harness.
Two vehicle attachment points
Secure the Back and Base Before Driving
01
Open the Car-Seat Shape
Insert the support pieces and place the carrier on the seat.
02
Attach the Headrest Strap
Loop the adjustable upper strap around the headrest.
03
Tighten the Seat Anchor Strap
Secure the lower strap around the compatible vehicle seat.
04
Connect the Safety Tether
Clip it to the pet’s harness and check the movement range.
Continue the journey after parking
Car Seat, Backpack or Hand Carry
Change the carrying method for driving, walking and short transfers.
Airflow from multiple sides
Mesh Panels Help the Interior Feel More Open
Breathable nylon mesh allows airflow while helping pets observe the surrounding environment.
01
Large Side Mesh Panel
Supports ventilation along the carrier side.
02
Visual Contact
Lets the pet see outside while being carried.
03
Zippered Enclosure
Closes the backpack configuration for transport.
Structure beneath and around the pet
Reinforced Where Support Matters
Removable Support Rods
Structural rods help the opened carrier maintain its shape.
Three-Layer Base
Oxford fabric, high-density foam and fiberboard form the floor.
Travel-Ready Details
Side pockets, adjustable straps, buckles and tether are built in.
Store it between journeys
Fold Flat When the Trip Is Over
Remove the internal support pieces and compress the carrier into a flatter shape for home or trunk storage.
Removable Base Board
Take it out before folding or cleaning.
Removable Support Rods
Release the structure before compression.
Dual Side Pockets
Store waste bags, treats or small accessories.
Padded Top Handle
Supports short lifts and transfers.
Measure the pet before ordering
Check Sitting and Turning Space
Confirm that your pet can sit, lie down and turn comfortably inside the available carrier space.
Product Size
42 × 22 × 45 cm
Product Size
16.5 × 8.7 × 17.7 in
Net Weight
Approx. 1.4 kg / 3.1 lb
Recommended Pet Weight
Up to 7 kg / 15.4 lb
Main Material
600D Oxford Fabric
Ventilation Material
Nylon Mesh
Fit and Vehicle Reminder
Choose by body measurements rather than weight alone. Confirm that the vehicle straps can be secured without blocking airbags, seat belts, doors or controls.
Clean after travel
01
02
03
Remove the Structure Before Washing
Remove Base and Rods
Take out the support board and structural rods before cleaning.
Gently Hand Wash
Use cool water and a small amount of mild detergent.
Air Dry Completely
Do not machine wash or bleach. Dry in a ventilated area.
Travel questions
Before the First Trip
How does it convert from a car seat into a backpack?
Release the vehicle straps, close the carrier panels and zippers, then adjust the two shoulder straps before wearing it.
What size pet is it designed for?
It is recommended for small dogs and cats up to approximately 7 kg / 15.4 lb. Also confirm the pet can sit and turn inside the 42 × 22 × 45 cm carrier.
How is it secured to the vehicle seat?
The upper strap loops around a compatible headrest, while the lower seat-anchor strap helps secure the carrier against the seat.
Should the internal tether connect to a collar?
No. Attach the internal tether to a properly fitted chest harness, not directly to a neck collar.
Are the support rods removable?
Yes. The structural rods and reinforced base board can be removed for folding and cleaning.
Is it suitable for front passenger-seat use?
Install it only where the straps can be secured correctly. Follow the vehicle manufacturer’s airbag guidance and never place the carrier where it interferes with an active airbag.
Is this a crash-tested restraint?
The product page does not identify it as crash tested. Treat it as a travel carrier and movement-control seat rather than guaranteed crash protection.
How should the fabric cover be cleaned?
Remove the support board and rods, gently hand wash the fabric with mild detergent and air dry completely. Do not machine wash or bleach.
